STEP 1 REMOVE THE FACTORY SIGNAL BY REMOVING THE 3 ALLED HEAD SCREWS ON THE SIDE OF THE FAIRING

CUT THE FACTORY SIGNAL OFF OF THE WIRES AS LONG AS YOU CAN

THEN ATTACH IT TO THE LED AND RESISTOR

YOU ATTACH THE RED OF THE RESISTOR TO THE POSITIVE TURN WIRE WHICH IS SOLID BLUE OR ORANGE THEN YOU ATTACH THE BLACK OF THE RESISTOE TO THE NEGATIVE TURN WIRW WHICH IS GREEN ON BOTH SIDES

DO NOT ATTACH ANY WIRE TO THE WHITE STRIPE ORANGE OR BLUE UNLESS YOU HAVE A 3 WIRE HOOK UP

MAKE SURE YOU PUT THE PLATE UNDER THE LED BEFORE YOU MOUNT IT TO THE FAIRING WITH THE SCREWS PROVIDED

THIS IS WHAT YOU LED TURN SIGNAL SHOULD LOOK LIKE